PRINTER FRIENDLY VERSION

Medical Gas Brazing Certification Renewal:                                                                Instructor(s): S Celli

Medical Gas Brazing Certifications that are expired and you are unemployed the Training Center is open for brazing renewals on the (2nd) second and (4th) fourth Thursday of each month at 4:PM.  Please have check in the amount of $50 made payable to NITC.

Medical Gas Brazing Certifications that are due to expire and you are employed please make sure the paperwork sent to you is completed by your company representative before mailing to the Education Fund.

Medical Gas 32 Hour Course:                                                                           Instructor(s): R Heim, S Celli

This course is for members who have never taken the medical course or have medical gas certifications that have expired and are required to take the course again.

  • SEPTEMBER 6, 2018 through SEPTEMBER 11, 2018

    Weekdays: 4:PM to 7: PM                 Weekends: 7:AM to Noon

    CHECK AND APPLICATION ARE DUE ON OR BEFORE:                               August 17, 2018

     

  • OCTOBER 18, 2018 through OCTOBER 23, 2018 (limited space available)

           Weekdays: 4:PM to 7: PM                   Weekends: 7:AM to Noon

          CHECK AND APPLICATION ARE DUE ON OR BEFORE:                    September 28, 2018

To register for this course, complete the APPLICATION FOR MEDICAL GAS CERTIFICATION for the testing agency to participate in the class along with a check in the amount of $100 made payable to Plumbers Local 12 Education Fund to hold your registration.

NITC strictly adheres to the 3 weeks prior to the class deadline.  Any checks or applications after this date will not be allowed to participate.

Medical Gas Installer 6 Hour Re-Certification:                                                        Instructor(s): R Heim, S Celli

If the installer portion of your medical gas license is due to expire and you have not received notification from this office, please note that there are several classes scheduled to assist you with keeping your installer certification current.

Session I:       SEPTEMBER 2018

Monday          September 24, 2018

Wednesday    September 26, 2018

FORM MUST BE RETURNED BY: August 31, 2018

Session II:      NOVEMBER 2018

Monday          November 26, 2018

Wednesday    November 28, 2018

FORM MUST BE RETURNED BY: November 5, 2018

**Please note the deadline for registration.  Any forms received after the deadline will not be able to participate in the class and your check will be returned to you**

Each session consists of 2 days. Class is held on Monday and Wednesday from 4:PM to 7:PM

Please fill out and return the REGISTRATION FORM

and a check for $49.00 made out to NITC to enroll in this class.

Foreman’s Course:                                                                                       Instructor(s): P Dean, B Farrell

This is a 3 Week Course designed for Journeyman to learn the basics to be a foreman.

  • February 20th to March 8th

Class will be held on Tuesday’s and Thursday’s evenings from 4:PM to 7:PM

OSHA 10 Hour:                                                                              Instructor(s): K Garside, R Heim, G Petersen

Class will be held Friday & Saturday

  •   Session II:May 18th and May 19th

Weekdays 4:PM to 7:PM and Saturday 7:AM to 4:PM.  You must attend all classes

**Minimum 5 Students**

OSHA 30 Hour:                                                                              Instructor(s): K Garside, R Heim, G Petersen

This class will be held on the following dates:

  •   Session II: May 18th, 19th, 22nd, 23rd, 24th, 29th, 30th, and 31st
  • Weekdays 4:PM to 8:PM and Saturday 7:AM to 4:PM You must attend all 8 classes.

    ** Maximum 40 Students**


    Crane Signaling:                    Instructor(s): S Celli

    This class will be held on the following dates to become a qualified Crane Signal Person

  • Session I: February 8th, 13th and 15th

  • Session II: May 8th, 10th, and 15th

Class will be held on Tuesday’s and Thursday’s evenings from 4:PM to 7:PM

Master’s License Review / Tier 5:                  Instructor(s): P Dean, B Farrell, D MacDonald, G Petersen, R Heim

This is a 110-hour review for the Master Plumbers License and Qualified for Tier 5

  • January 9th through May 24th

    Class will be held on Tuesdays and Thursdays evenings from 4:PM to 8:PM

    Residential Hot Water Class:                    Instructor(s): S Davis

    This is a 3-week class on installation and troubleshooting of high efficiency hot water heaters.

  • March 26th to April 4th

    Class will be held Mondays and Wednesdays evenings from 4:PM to 7:PM limited to 10 members

    Solar Rain Water Reuse Class:                    Instructor(s): G Petersen

    Local 12 Education Fund is continuing to offer green technology training. This class will train members on the installation and maintenance of solar hot water heating systems and rainwater reuse systems.

    Trimble:                    Instructor(s): D MacDonald

    This class will train members on the basic use and operation of the Trimble Equipment.

  • March 7th to March 30th

    Class will be held Tuesdays and Thursdays evenings from 4:PM to 7:PM limited to 10 members

    Hot Work Training:                    Instructor(s): S Celli, J Kyne, D MacDonald, G Petersen

      Session I: Monday, March 5, 2018
  •   Session II: Monday, May 14, 2018
  • You must be pre-registered enclose a check made payable to PLUMBERS LOCAL 12 EDUCATION FUND in the amount of $25 along with application available online at www.local12training.org under hot work training.

    Class will be held Monday evenings from 4:PM to 7:PM

    Drain Cleaning:                    Instructor(s): TBD

    This class will train members on the basic use and operation of the Drain Cleaning Equipment.

  • TBD

    Class will be held Saturdays from 7:AM to 12:PM limited to 10 members

    PlanGrid Training:                    Instructor(s): G. Petersen

    This class will train members on the basic use and operation of the PlanGrid Software.

  • April 23rd to May 16th

Class will be held Mondays & Wednesday from 4:PM to 7:PM limited to 15 Members

APPLICATION FOR ALL OTHER CLASSES CLICK HERE

*Date to be determined based on the number of member participation